Concrete Driveway Cost in North Miami: Local Price Guide

Average Cost to Install a Concrete Driveway in North Miami

The average price for installing a standard 4-inch thick, 20×40-foot concrete driveway is between $8 and $15 per square foot, which equates to a cost of $6,400 to $12,000 for a single installation. These prices consider the average hourly rate for contractors in North Miami ($40–$75), labor hours spent on the job (typically 2–4 days depending on size and complexity), and the cost of materials and permits required for the project. The cost will also be affected by the number of cars using the driveway, whether it has a slope, and the type of finish chosen.

Decorative Driveway Costs

There is no standard way to determine the cost of a decorative driveway because every driveway is different. However, here is a rough estimate of how much you might expect to pay for a decorative driveway based on the type of finish you choose:

• Stamped Patterns: Stamped concrete is available in many different patterns, including brick, stone, and tile. The cost of stamped concrete ranges from $8 to $18 per square foot, depending on the pattern, the contractor, and the location.
• Stained Concrete: Staining is a technique used to add color to the surface of the concrete. The cost of stained concrete can range from $3 to $6 per square foot.
• Exposed Aggregate: Exposed aggregate is a method of finishing the top layer of the driveway to show off the aggregate (pebbles). The cost of exposed aggregate ranges from $6 to $12 per square foot.
• Colored Concrete: Colored concrete is made by mixing dye into the wet concrete. The cost of colored concrete ranges from $2 to $4 per square foot.

High-Traffic Areas

If your driveway will have a lot of heavy traffic, it will need to be reinforced with steel mesh and/or rebar. This will add another $2 to $5 per square foot to the cost of the driveway. If you live near Oleta River State Park, you may need to use reinforced concrete because of the clay soil.

Large Driveways

Larger driveways serve more cars, and the bigger they are, the more expensive they tend to be. For example:

• A 24×48-foot driveway would cost between $7,680 and $14,400.
• A 36×72-foot driveway would cost between $11,760 and $23,040.

Pricing Per Square Foot

Here is some pricing information for concrete driveways based on size:

• Small (single car): $1,600 to $3,000
• Medium (two cars): $6,400 to $12,000
• Large (three cars or more): $9,600 to $20,000
• Extremely Large (four cars or more): $13,280 to $28,800

Price Factors

Driveway cost is influenced by several factors, including:

• Location (soil conditions)
• Permits and inspection fees
• Contractor overhead and profit
• Material costs
• Delivery and transportation costs
• Installation costs (labor and equipment)

Factors That Can Increase Price

Costs can go up due to:

• Soil problems (unstable ground, poor drainage, etc.)
• Water table issues
• Specialized drainage solutions (e.g., French drains, etc.)
• Poor access to the site (e.g., narrow roads, lack of parking, etc.)

Cost Ranges for Various Services

• Drainage Solutions: $500 to $2,000
• Excavation and Grading Costs: $3 to $8 per square foot
• Thickness Requirements: Increasing the thickness of the driveway from 4 inches to 6 inches will add about 50% to the total cost of the driveway.
• Reinforcing Materials: $1 to $3 per square foot

Professional Contractor Fees

A professional contractor will include the cost of permits and inspections in their bid for the job. However, they will typically not include the cost of demolition and removal of the old driveway in their bid unless you ask them to do so. If you want the contractor to demolish and remove the old driveway, you should plan on paying an extra $2 to $4 per square foot for this service. It is best to ask for a separate bid for the demolition and removal service.

Permit Costs

• Average Cost to Obtain a Building Permit: $150 to $400
• Public Works Permit Fees: $200 to $600
• Permit Inspection Fees: $100 to $300

Decorative Finishes and Materials

• Coloring: $2 to $4 per square foot
• Acid Staining: $3 to $6 per square foot
• Stamped Concrete Patterns: $8 to $18 per square foot
• Exposed Aggregate: $6 to $12 per square foot

Decorative Concrete Features

• Custom Borders: $15 to $30 per square foot
• Hand-Carved Details: $15 to $30 per square foot
• Combination Treatments: $25 to $40 per square foot

Protective Coatings

• Cost Range: $1 to $3 per square foot

Labor and Installation

• Cost Range: $40 to $75 per hour
• Duration: 2 to 4 days

Seasonal Pricing

• Dry Season (November through April): 10 to 20% higher than normal.
• Wet Season (May through October): 10 to 20% lower than normal.
• Hurricane Season (June through September): Difficult to schedule and potentially higher costs due to weather-related delays.

Materials

• Ready-Mix Concrete: $150 to $200 per cubic yard.
• Delivered Ready-Mix Concrete: $120 to $180 per cubic yard.
• Fiber Reinforced Concrete: $15 to $30 per cubic yard.
• High-Strength Concrete: $20 to $40 per cubic yard.
• Admixtures: $10 to $25 per cubic yard.

Maintenance and Warranty Costs

• Cleaning: Free.
• Sealing: $1 to $3 per square foot.
• Repairing cracks and other damage: Variable.
• Replacing damaged or worn-out sections: Variable.

Tips to Save Money on Your Project

• Schedule your project for a slow period: 10 to 20% cheaper than peak season.
• Combine multiple projects: 5 to 10% cheaper than individual projects.
• Choose a simple design: 5 to 10% cheaper than a complex design.
• Use basic finishes: 5 to 10% cheaper than decorative finishes.
• Consider an overlay system: 20 to 30% cheaper than a new installation.
• Work with a qualified concrete contractor who knows what they are doing: 10 to 20% cheaper than working with someone who does not know what they are doing.
• Get multiple bids: 5 to 10% cheaper than going with one contractor.
• Plan: Avoid rush jobs and last-minute changes.
• Keep track of your maintenance schedule: Avoid costly repairs down the road.
• Do not skimp on quality: The cheapest option may not always be the best value.

Value Engineering Approaches

• Use the right amount of concrete for the job: Avoid wasting money on excess material.
• Select the right materials: Choose materials that fit your budget and your needs.
• Plan: Avoid rush jobs and last-minute changes.
• Get multiple bids: Compare prices and services before making a decision.
• Negotiate: Try to get the best deal possible.

Your Investment Decision

You will want to carefully consider all of the factors mentioned above to make sure you invest wisely in your project. Remember, investing in a high-quality, well-designed driveway can help to boost your property value and create a beautiful addition to your home. As a homeowner in North Miami, there are many reasons to choose a concrete driveway, including:

• Durable: Concrete driveways are durable and can withstand heavy use.
• Low Maintenance: Once installed, concrete driveways require very little maintenance.
• Environmentally Friendly: Concrete is a green building material and is recyclable.
• Long-lasting: Concrete driveways can last for decades with proper care.
• Attractive: Concrete driveways come in a variety of colors and styles to match any home décor.
• Increase Home Value: A high-quality concrete driveway can increase your home’s resale value.
• Reliable: Concrete driveways are reliable and will withstand the test of time.

At North Miami Concrete Pros, we provide comprehensive concrete driveway solutions designed to meet your specific needs while delivering exceptional value and lasting performance.